Receive access to an electronic copy viewable in a web browser or the Orderline Reader app (Click here to view a demo)
Orderline Reader app available for Windows, Mac, Android, and iOS (Click here to download)
Offline access via Orderline Reader app
Reflowable layout suitable for viewing on any device Orderline Reader app
Font-size controls
Text to speech
Built-in search feature
Google and Wikipedia lookup
Ability to add custom highlights, bookmarks, and notes
Can be registered on up to 3 personal devices total (example: computer, laptop, phone)
Receive access to an online PDF copy viewable in a web browser
Offline access via bookmark to a cached web page
Single user access on up to 3 devices
All online copies are watermarked with your license information
Receive access to an online course viewable in a web browser
Receive access to an online course viewable in a web browser
Receive access to an interactive online copy viewable in a web browser (Click here to view a demo)
Searchable
Printable
Expandable images
Drop-down definitions
Links
Receive access to an online webinar hosted through Zoom
Product Overview
ANSI Z21.79-1997 (R2017)/CGA 6.21-M97 (R2016)
CSA Group
Gas Appliance Sediment Traps
Total
As low as$680.00
More About This Product
Description
Scope 1.1.1 This Standard applies to newly produced gas appliance sediment traps hereinafter referred to as traps (see Part IV, Definitions), constructed entirely of new, unused parts and materials. Compliance of a trap with this standard does not imply that the trap is acceptable for use on a gas appliance without supplemental tests with the trap applied to the particular appliance design. 1.1.2 This Standard applies to traps having maximum operating gas pressure ratings of 1/2 psi (3.5 kPa). 1.1.3 This Standard applies to traps which are mounted in accordance with the manufacturer's installation instructions (see 2.1.2). 1.1.4 Traps complying with the provisions of this standard shall be considered as having an operating temperature range of 32°F to 125°F (0°C to 51.5°C). They may be capable of operating at a higher temperature, lower temperature, or both when so specified by the manufacturer. 1.1.5 If a value for measurement as given in this standard is followed by an equivalent value in other units, the first stated value is to be regarded as the specification. 1.1.6 Exhibit A contains a list of standards specifically referenced in this standard, and sources from which these reference standards may be obtained. 1.1.7 Exhibit B is a list of materials needed and a detailed step-by-step procedure for conducting the sediment trap testing outlined under 2.6. 1.1.8 Exhibit C contains provisions that are unique to Canada. 1.1.9 All references to psi throughout this standard are to be considered gauge pressures unless otherwise specified.
Scope 1.1.1 This Standard applies to newly produced gas appliance sediment traps hereinafter referred to as traps (see Part IV, Definitions), constructed entirely of new, unused parts and materials. Compliance of a trap with this standard does not imply that the trap is acceptable for use on a gas appliance without supplemental tests with the trap applied to the particular appliance design. 1.1.2 This Standard applies to traps having maximum operating gas pressure ratings of 1/2 psi (3.5 kPa). 1.1.3 This Standard applies to traps which are mounted in accordance with the manufacturer's installation instructions (see 2.1.2). 1.1.4 Traps complying with the provisions of this standard shall be considered as having an operating temperature range of 32°F to 125°F (0°C to 51.5°C). They may be capable of operating at a higher temperature, lower temperature, or both when so specified by the manufacturer. 1.1.5 If a value for measurement as given in this standard is followed by an equivalent value in other units, the first stated value is to be regarded as the specification. 1.1.6 Exhibit A contains a list of standards specifically referenced in this standard, and sources from which these reference standards may be obtained. 1.1.7 Exhibit B is a list of materials needed and a detailed step-by-step procedure for conducting the sediment trap testing outlined under 2.6. 1.1.8 Exhibit C contains provisions that are unique to Canada. 1.1.9 All references to psi throughout this standard are to be considered gauge pressures unless otherwise specified.