TOLL FREE · 1-888-361-0003 Our Customer Support is ready to help!
Formats Available:
Online,
Print
Product Overview
CAN/CSA-C22.2 NO. 62841-3-1:16
CSA Group Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-1: Particular requirements for transportable table saws (Bi-national standard with UL 62841-3-1)
Total
As low as
$300.00
More About This Product
Description
Preface This is the harmonized CSA Group and UL Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws. It is the First edition of CAN/CSA-C22.2 No. 62841-3-1 and the First edition of UL 62841-3-1. This harmonized standard is based on IEC Publication 62841-3-1: First edition, Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws issued June 2014. IEC publication 62841-3-1 is copyrighted by the IEC. Scope This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable table saws with a toothed single blade; or stacked blades that cut a single groove or slot; or a moulding head cutter intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter between 105 mm and 315 mm, which hereinafter may simply be referred to as saw or tool. This Standard does not apply to table saws intended to cut other metals, such as magnesium, steel and iron. This Standard does not apply to table saws with an automatic feeding device. This Standard does not apply to saws designed for use with abrasive wheels. NOTE 101 : Saws designed for use with abrasive wheels as cut-off machines are covered by IEC 62841-3-10. This Standard does not apply to table saws with more than one spindle such as for a scoring blade. NOTE 102 : In Europe (EN 62841-3-1), the following conditions apply: This Standard applies to table saws having a mass of: maximum 25 kg for tools capable of being lifted by hand by one person; maximum 50 kg for tools capable of being lifted by hand by two persons. This Standard does not apply to stationary table saws.
Preface This is the harmonized CSA Group and UL Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws. It is the First edition of CAN/CSA-C22.2 No. 62841-3-1 and the First edition of UL 62841-3-1. This harmonized standard is based on IEC Publication 62841-3-1: First edition, Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws issued June 2014. IEC publication 62841-3-1 is copyrighted by the IEC. Scope This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable table saws with a toothed single blade; or stacked blades that cut a single groove or slot; or a moulding head cutter intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter between 105 mm and 315 mm, which hereinafter may simply be referred to as saw or tool. This Standard does not apply to table saws intended to cut other metals, such as magnesium, steel and iron. This Standard does not apply to table saws with an automatic feeding device. This Standard does not apply to saws designed for use with abrasive wheels. NOTE 101 : Saws designed for use with abrasive wheels as cut-off machines are covered by IEC 62841-3-10. This Standard does not apply to table saws with more than one spindle such as for a scoring blade. NOTE 102 : In Europe (EN 62841-3-1), the following conditions apply: This Standard applies to table saws having a mass of: maximum 25 kg for tools capable of being lifted by hand by one person; maximum 50 kg for tools capable of being lifted by hand by two persons. This Standard does not apply to stationary table saws.