Formats Available: Online, Print
Product Overview

CAN/CSA-C22.2 NO. 62841-3-4:16

CSA Group Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-4: Particular requirements for transportable bench grinders (Bi-national standard with UL 62841-3-4)

Total
As low as $200.00
Select Format Required

More About This Product

Description
Preface This is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 3-4: Particular Requirements for Transportable Bench Grinders. It is the First edition of CAN/CSA-C22.2 No. 62841-3-4 and the First edition of UL 62841-3-4. This harmonized standard is based on IEC Publication 62841-3-4: First edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 3-4: Particular Requirements for Transportable Bench Grinders issued February 2016. IEC 62841-3-4 is copyrighted by the IEC. Scope This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to transportable bench grinders that can be equipped with one or two accessories as follows: – type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; – wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; – polishing wheels with a diameter not exceeding 310 mm; and with a peripheral speed of any accessory between 10 m/s and 50 m/s. NOTE Polishing wheels are also known as buffing wheels.
Preface This is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 3-4: Particular Requirements for Transportable Bench Grinders. It is the First edition of CAN/CSA-C22.2 No. 62841-3-4 and the First edition of UL 62841-3-4. This harmonized standard is based on IEC Publication 62841-3-4: First edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 3-4: Particular Requirements for Transportable Bench Grinders issued February 2016. IEC 62841-3-4 is copyrighted by the IEC. Scope This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to transportable bench grinders that can be equipped with one or two accessories as follows: – type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; – wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; – polishing wheels with a diameter not exceeding 310 mm; and with a peripheral speed of any accessory between 10 m/s and 50 m/s. NOTE Polishing wheels are also known as buffing wheels.