CSA Group Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature (Adopted ISO/IEC 15056:1997, first edition, 1997-0

Preface This International Standard specifies the signaling protocol for the support of the Transit Counter additional network feature (ANF-TC) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). ANF-TC is a feature that limits the number of Transit PINXs that a call setup request may be routed through e.g., to protect the network against indefinite looping. The Q reference point is defined in ISO/IEC 11579- 1. Service specifications are produced in three stages and according to the method specified in CCITT Recommendation I. 130. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 15055. The signaling protocol for ANF-TC operates in association with the signaling protocols for basic circuit switched call control (as specified in ISO/IEC 11572) and call independent (connection oriented) signaling connections (as specified in ISOIIEC 11582). This International Standard also specifies additional signaling protocol requirements for the support of interactions at the Q reference point between ANF-TC and other supplementary services and ANFs. This International Standard is applicable to PINXs that can interconnect to form a PISN.