TOLL FREE · 1-888-361-0003 Our Customer Support is ready to help!
Formats Available:
Online,
Print
Product Overview
ANSI/CAN/UL/ULC 1395:2025STANDARD FOR SAFETY Transients Test Method
ULC ANSI/CAN/UL/ULC 1395:2025STANDARD FOR SAFETY Transients Test Method
Total
As low as
$520.00
More About This Product
Description
Preface
This is the First Edition of ANSI/CAN/UL/ULC 1395, Standard for Transients Test Method.
ULSE is accredited by the American National Standards Institute (ANSI) and the Standards Council of Canada (SCC) as a Standards Development Organization (SDO). ULC Standards is accredited by the
Standards Council of Canada (SCC) as a Standards Development Organization (SDO).
This Standard has been developed in compliance with the requirements of ANSI and SCC for accreditation of a Standards Development Organization.
This ANSI/CAN/UL/ULC 1395 Standard is under continuous maintenance, whereby each revision is approved in compliance with the requirements of ANSI and SCC for accreditation of a Standards
Development Organization. In the event that no revisions are issued for a period of four years from the date of publication, action to revise, reaffirm, or withdraw the standard shall be initiated.
Annex A, identified as Informative, is for information purposes only.
In Canada, there are two official languages, English and French. All safety warnings must be in French and English. Attention is drawn to the possibility that some Canadian authorities may require additional markings and/or installation instructions to be in both official languages.
Requests for interpretation of this Standard should be sent to ULC Standards. The requests should be worded in such a manner as to permit a “yes” or “no” answer based on the literal text of the requirement concerned.
Comments or proposals for revisions on any part of the Standard may be submitted at any time. Proposals should be submitted via a Proposal Request in the Collaborative Standards Development System (CSDS) at https://csds.ul.com.
Our Standards for Safety are copyrighted by ULSE Inc. Neither a printed nor electronic copy of a Standard should be altered in any way. All of our Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of ULSE Inc.
This Edition of the Standard has been formally approved by the Technical Committee (TC) on Transients Test Method, TC 1395.
This list represents the TC 1395 membership when the final text in this standard was balloted. Since that time, changes in the membership may have occurred.
Scope
1.1 These requirements cover the transients test method for fire, security, and life safety equipment.
These tests include supply line (ring wave surge voltage) transients, Internally induced Transients, Sequential Arc Transients, Radiated Electromagnetic Fields, Field-Wiring Transients, Surge Immunity Test (Combination Wave), Surge Current Test, and Static Discharge Test.
1.2 Tests conducted in accordance with these requirements are intended to demonstrate that the intended operation of the device is not impaired [electromagnetic compatibility (EMC)] when subject to electromagnetic interferences (EMI) generated by the specified test method, devices and/or appliances outlined in this standard.
1.3 These requirements cover the circuits, ports, or surfaces being subjected to the relevant tests unless otherwise specified in the end product standard
Preface
This is the First Edition of ANSI/CAN/UL/ULC 1395, Standard for Transients Test Method.
ULSE is accredited by the American National Standards Institute (ANSI) and the Standards Council of Canada (SCC) as a Standards Development Organization (SDO). ULC Standards is accredited by the
Standards Council of Canada (SCC) as a Standards Development Organization (SDO).
This Standard has been developed in compliance with the requirements of ANSI and SCC for accreditation of a Standards Development Organization.
This ANSI/CAN/UL/ULC 1395 Standard is under continuous maintenance, whereby each revision is approved in compliance with the requirements of ANSI and SCC for accreditation of a Standards
Development Organization. In the event that no revisions are issued for a period of four years from the date of publication, action to revise, reaffirm, or withdraw the standard shall be initiated.
Annex A, identified as Informative, is for information purposes only.
In Canada, there are two official languages, English and French. All safety warnings must be in French and English. Attention is drawn to the possibility that some Canadian authorities may require additional markings and/or installation instructions to be in both official languages.
Requests for interpretation of this Standard should be sent to ULC Standards. The requests should be worded in such a manner as to permit a “yes” or “no” answer based on the literal text of the requirement concerned.
Comments or proposals for revisions on any part of the Standard may be submitted at any time. Proposals should be submitted via a Proposal Request in the Collaborative Standards Development System (CSDS) at https://csds.ul.com.
Our Standards for Safety are copyrighted by ULSE Inc. Neither a printed nor electronic copy of a Standard should be altered in any way. All of our Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of ULSE Inc.
This Edition of the Standard has been formally approved by the Technical Committee (TC) on Transients Test Method, TC 1395.
This list represents the TC 1395 membership when the final text in this standard was balloted. Since that time, changes in the membership may have occurred.
Scope
1.1 These requirements cover the transients test method for fire, security, and life safety equipment.
These tests include supply line (ring wave surge voltage) transients, Internally induced Transients, Sequential Arc Transients, Radiated Electromagnetic Fields, Field-Wiring Transients, Surge Immunity Test (Combination Wave), Surge Current Test, and Static Discharge Test.
1.2 Tests conducted in accordance with these requirements are intended to demonstrate that the intended operation of the device is not impaired [electromagnetic compatibility (EMC)] when subject to electromagnetic interferences (EMI) generated by the specified test method, devices and/or appliances outlined in this standard.
1.3 These requirements cover the circuits, ports, or surfaces being subjected to the relevant tests unless otherwise specified in the end product standard