Guide to Canadian Plumbing Codes and Venting Systems for Plumbing National Edition Pack

Guide to Canadian Plumbing Codes

The first of its kind in Canada!

Containing over 950 pages of continuous running regulation for plumbing statutes across the country with over 150 detailed illustrations, the Guide to Canadian Plumbing Codes is a complete concordance of plumbing statutes for Canada. Using Ontario as the source plumbing code document, this guide compares each provinces plumbing regulations and statutes as they relate to the Canadian plumbing code.

This “must have” guide was created specifically for the plumber, plumbing apprentice, plumbing contractor, building official, estimator or plumbing engineer in need of province specific regulation combined into one source document. Whether you work in one province or all, each clause runs in concurrence to the sentence or article.

GUIDE TO CANADIAN PLUMBING CODES AND REGIONAL AMENDMENTS:
Albert Regulation 117/2007, Safety Codes Act.
British Columbia Regulation 264/2012
Manitoba Plumbing Regulation 32/2011
New Brunswick Regulation 84-187 13 (2014)
Nova Scotia Building Code Regulations 26/2017
Ontario Building Code Regulation 332/12
Code for Plumbing Services Regulations, PEI Reg. EC666/86
Quebec Construction Code, CQLR c B-1.1, r 2
Saskatchewan Plumbing Regulations P-37.1 Regulation 13 (2011)
Vancouver Building By-Law No. 10908, 07/2014

Venting Systems for Plumbing National Edition

With over 80 Illustrations and Code interpretations by Rainier Bratsch-Blundel, Master Plumber and Plumbing Professor at George Brown College, this guide contains all Canadian Plumbing Code and Regional Amendments information relevant to venting systems.

This book was developed to address the growing need to clarify the ongoing changes and interpretations of Building Codes and Plumbing Codes used by inspectors and professionals in the field. The interpretations in the book are based upon decades of instructing Plumbing Apprentices at the foremost leading technology training facility and upon workplace experience as Plumbing Professionals in the field.

National version including regional amendments:
Albert Regulation 117/2007, Safety Codes Act.
British Columbia Regulation 264/2012
Manitoba Plumbing Regulation 32/2011
New Brunswick Regulation 84-187 13 (2014)
Nova Scotia Building Code Regulations 26/2017
Ontario Building Code Regulation 332/12
Code for Plumbing Services Regulations, PEI Reg. EC666/86
Quebec Construction Code, CQLR c B-1.1, r 2
Saskatchewan Plumbing Regulations P-37.1 Regulation 13 (2011)
Vancouver Building By-Law No. 10908, 07/2014

Guide to Canadian Plumbing Codes

Part 1 Division A
Part 1 Division B
Part 1 Division C

Part 2 Division A
Part 2 Division C

Part 3 Division A
Part 3 Division B

Part 6 Division B

Part 7 Division B

Ontario, Part 8 Division B

Part 9 Division B

Appendix

Index

Venting Systems for Plumbing National Edition

INTRODUCTION
SECTION 5 – VENTING SYSTEMS
1 – VENT PIPES FOR TRAPS
2 – WET VENTING
3 – CIRCUIT VENTING
4 – VENT PIPES FOR SOIL OR WASTE STACKS
5 – MISCELLANEOUS VENT PIPES
6 – ARRANGEMENT OF VENT PIPES
7 – MINIMUM SIZE OF VENTS
8 – SIZING OF VENT PIPES
9 – AIR ADMITTANCE VALVES

Rainier Bratsch-Blundell , President of the Ontario Plumbing Inspectors Association, is a certified plumbing systems inspector with over 25 years’ experience and a Plumbing Professor at George Brown College. As well as illustrating the Ministry of Municipal Affairs and Housing’s Code and Guide for Plumbing 2006, he is the author and illustrator of Venting Systems for Plumbing Illustrated Code Series manual used extensively by students and professionals across the province.