If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
This pack includes:
Ontario Building Code Training - Module 1 - HVAC Requirements in Part 9
Ontario Building Code Training - Module 2 - Heating, Ventilation, and Air Conditioning
Ontario Building Code Training - Module 3 - Part 7 Plumbing Systems
As low as $99.99 Regular Price $105.00
If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
This pack includes:
1) Ontario Building Code Training - Module 1 - HVAC Requirements in Part 9
HVAC Requirements is the first in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario.
This 2 part module focuses on HVAC requirements in Part 9, with over 1 hour of content including the following:
Module 1 - HVAC Requirements in Part 9
Part 1
This training Module covers the following topics for HVAC requirements in Part 9 of Division B of the Ontario Building Code.
General
9.33.1.1. Design and Installation Requirements
9.33.1.2. Solid Fuel-Burning Appliances
9.33.1.3. Structural Movement
Heating Systems
9.33.2.1. Residential Heating Systems
Design Temperatures
9.33.3.1. Indoor Design Temperatures
9.33.3.2. Outdoor Design Temperatures
Carbon Monoxide Alarms
9.33.4.1. Application
9.33.4.2. Location of Carbon Monoxide Alarms
9.33.4.3. Installation and Conformance to Standards
Part 2
General
6.1.1.1. Scope
Design
6.2.1.1. Good Engineering Practice
6.2.1.6. Heat Recovery Ventilators
Ventilation
6.2.2.1. Required Ventilation
Air Ducts for Low Capacity Systems
6.2.4.1. Application
6.2.4.2. Duct Design
6.2.4.3. Construction and Installation of Ducts and Plenums
6.2.4.4. Warm-Air Supply Outlets
6.2.4.6. Adjustable Dampers and Balance Stops
6.2.4.7. Return-Air Systems
6.2.4.10. Clearances of Ducts and Plenums
6.2.4.11. Exhaust Ducts and Outlets
6.2.4.12. Make-up Air
6.2.4.13. Supply, Return, Intake and Exhaust Air Opening
6.2.4.14. Air Filters and Equipment
At the end of each video, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
2) Ontario Building Code Training - Module 2 - Heating, Ventilation, and Air Conditioning
Module 2 HVAC Requirements is the second module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario. This module focuses on the following requirements:
Module 2 Part 6 -– Heating, Ventilation and Air Conditioning
General
6.1.1.1. Scope
Design
6.2.1.1. Good Engineering Practice
6.2.1.6. Heat Recovery Ventilators
Ventilation
6.2.2.1. Required Ventilation
Air Ducts for Low Capacity Systems
6.2.4.1. Application
6.2.4.2. Duct Design
6.2.4.3. Construction and Installation of Ducts and Plenums
6.2.4.4. Warm-Air Supply Outlets
6.2.4.6. Adjustable Dampers and Balance Stops
6.2.4.7. Return-Air Systems
6.2.4.10. Clearances of Ducts and Plenums
6.2.4.11. Exhaust Ducts and Outlets
6.2.4.12. Make-up Air
6.2.4.13. Supply, Return, Intake and Exhaust Air Opening
6.2.4.14. Air Filters and Equipment
Piping for Heating and Cooling Systems
6.2.9.1. Piping Materials and Installation
6.2.9.2. Insulation and Coverings
6.2.9.3. Clearances
6.2.9.4. Surface Temperature
6.2.9.5. Protection
Mechanical Ventilation
9.32.3.1. General
9.32.3.2. Required Mechanical Ventilation
9.32.3.4. Principal Exhaust
9.32.3.5. Supplemental Exhaust
9.32.3.6. Ventilation Systems Coupled with Forced Air Heating Systems
9.32.3.7. Ventilation Not Systems Coupled with Forced Air Heating Systems
9.32.3.8. Protection Against Depressurization
9.32.3.9. Fan Ratings
9.32.3.10. Ducts
9.32.3.11. Heat Recovery Ventilators
9.32.3.12. Outdoor Intake and Exhaust Openings
9.32.3.13. Installation
At the end of each video, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
3) Ontario Building Code Training - Module 3 - Part 7 Plumbing Systems
Plumbing Systems is the final module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC and Plumbing systems for housing and small buildings in Ontario
Module 3 focuses on Part 7 - Plumbing Systems including:
Module 3 Part 7 – Plumbing Systems
This training Module covers the following topics in Part 76 of Division B of the Ontario Building Code.
Service Connections
7.1.5.1. Sanitary Drainage Systems
7.1.5.2. Storm Drainage Systema
7.1.5.3. Water Distribution Systems
7.1.5.4. Separate Services
Location of Fixtures
7.1.6.1. Lighting and Ventilation Requirements
7.1.6.2. Accessibility
Materials and Equipment
7.2.1.3. Identification and Certification
7.2.1.5. Withstanding Pressure
Fixtures
7.2.2.1. Surface Requirements
7.2.2.2. Conformance to Standards
7.2.2.3. Showers
7.2.2.4. Concealed Overflows
7.2.2.5. Lavatories
Pipe Fittings
7.2.4.1. T and Cross Fittings
7.2.4.3. 90° Elbows
7.2.4.4. Fittings Restricted in Use
Water Service Pipes and Fire Service Mains
7.2.11.2. Certification or Conformance
7.2.11.3. Tracer Wire
Support of Piping
7.3.4.1. Capability of Support
7.3.4.6. Support for Underground Horizontal Piping
Protection of Piping
7.3.5.1. Backfill of Pipe Trench
7.3.5.2. Protection of Non-Metallic Pipe
7.3.5.3. Isolation from Loads
7.3.5.4. Protection from Frost
7.3.5.7. Spatial Separation
Testing of Drainage and Venting Systems
7.3.6.1. Tests and Inspection of Drainage or Venting Systems
7.3.6.4. Water Tests in Drain, Waste and Vent Systems
7.3.6.5. Air Tests
Testing of Potable Water Systems
7.3.7.1. Application of Tests
7.3.7.2. Test of Potable Water Systems
Arrangement of Drainage Pipe
7.4.6.4. Protection from Backflow
Cleanouts
7.4.7.1. Cleanouts for Drainage Systems
7.4.7.2. Size and Spacing of Cleanouts
Minimum Slope and Length of Drainage Pipes
7.4.8.1. Minimum Slope
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
This pack includes:
1) Ontario Building Code Training - Module 1 - HVAC Requirements in Part 9
HVAC Requirements is the first in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario.
This 2 part module focuses on HVAC requirements in Part 9, with over 1 hour of content including the following:
Module 1 - HVAC Requirements in Part 9
Part 1
This training Module covers the following topics for HVAC requirements in Part 9 of Division B of the Ontario Building Code.
General
9.33.1.1. Design and Installation Requirements
9.33.1.2. Solid Fuel-Burning Appliances
9.33.1.3. Structural Movement
Heating Systems
9.33.2.1. Residential Heating Systems
Design Temperatures
9.33.3.1. Indoor Design Temperatures
9.33.3.2. Outdoor Design Temperatures
Carbon Monoxide Alarms
9.33.4.1. Application
9.33.4.2. Location of Carbon Monoxide Alarms
9.33.4.3. Installation and Conformance to Standards
Part 2
General
6.1.1.1. Scope
Design
6.2.1.1. Good Engineering Practice
6.2.1.6. Heat Recovery Ventilators
Ventilation
6.2.2.1. Required Ventilation
Air Ducts for Low Capacity Systems
6.2.4.1. Application
6.2.4.2. Duct Design
6.2.4.3. Construction and Installation of Ducts and Plenums
6.2.4.4. Warm-Air Supply Outlets
6.2.4.6. Adjustable Dampers and Balance Stops
6.2.4.7. Return-Air Systems
6.2.4.10. Clearances of Ducts and Plenums
6.2.4.11. Exhaust Ducts and Outlets
6.2.4.12. Make-up Air
6.2.4.13. Supply, Return, Intake and Exhaust Air Opening
6.2.4.14. Air Filters and Equipment
At the end of each video, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
2) Ontario Building Code Training - Module 2 - Heating, Ventilation, and Air Conditioning
Module 2 HVAC Requirements is the second module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario. This module focuses on the following requirements:
Module 2 Part 6 -– Heating, Ventilation and Air Conditioning
General
6.1.1.1. Scope
Design
6.2.1.1. Good Engineering Practice
6.2.1.6. Heat Recovery Ventilators
Ventilation
6.2.2.1. Required Ventilation
Air Ducts for Low Capacity Systems
6.2.4.1. Application
6.2.4.2. Duct Design
6.2.4.3. Construction and Installation of Ducts and Plenums
6.2.4.4. Warm-Air Supply Outlets
6.2.4.6. Adjustable Dampers and Balance Stops
6.2.4.7. Return-Air Systems
6.2.4.10. Clearances of Ducts and Plenums
6.2.4.11. Exhaust Ducts and Outlets
6.2.4.12. Make-up Air
6.2.4.13. Supply, Return, Intake and Exhaust Air Opening
6.2.4.14. Air Filters and Equipment
Piping for Heating and Cooling Systems
6.2.9.1. Piping Materials and Installation
6.2.9.2. Insulation and Coverings
6.2.9.3. Clearances
6.2.9.4. Surface Temperature
6.2.9.5. Protection
Mechanical Ventilation
9.32.3.1. General
9.32.3.2. Required Mechanical Ventilation
9.32.3.4. Principal Exhaust
9.32.3.5. Supplemental Exhaust
9.32.3.6. Ventilation Systems Coupled with Forced Air Heating Systems
9.32.3.7. Ventilation Not Systems Coupled with Forced Air Heating Systems
9.32.3.8. Protection Against Depressurization
9.32.3.9. Fan Ratings
9.32.3.10. Ducts
9.32.3.11. Heat Recovery Ventilators
9.32.3.12. Outdoor Intake and Exhaust Openings
9.32.3.13. Installation
At the end of each video, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
3) Ontario Building Code Training - Module 3 - Part 7 Plumbing Systems
Plumbing Systems is the final module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC and Plumbing systems for housing and small buildings in Ontario
Module 3 focuses on Part 7 - Plumbing Systems including:
Module 3 Part 7 – Plumbing Systems
This training Module covers the following topics in Part 76 of Division B of the Ontario Building Code.
Service Connections
7.1.5.1. Sanitary Drainage Systems
7.1.5.2. Storm Drainage Systema
7.1.5.3. Water Distribution Systems
7.1.5.4. Separate Services
Location of Fixtures
7.1.6.1. Lighting and Ventilation Requirements
7.1.6.2. Accessibility
Materials and Equipment
7.2.1.3. Identification and Certification
7.2.1.5. Withstanding Pressure
Fixtures
7.2.2.1. Surface Requirements
7.2.2.2. Conformance to Standards
7.2.2.3. Showers
7.2.2.4. Concealed Overflows
7.2.2.5. Lavatories
Pipe Fittings
7.2.4.1. T and Cross Fittings
7.2.4.3. 90° Elbows
7.2.4.4. Fittings Restricted in Use
Water Service Pipes and Fire Service Mains
7.2.11.2. Certification or Conformance
7.2.11.3. Tracer Wire
Support of Piping
7.3.4.1. Capability of Support
7.3.4.6. Support for Underground Horizontal Piping
Protection of Piping
7.3.5.1. Backfill of Pipe Trench
7.3.5.2. Protection of Non-Metallic Pipe
7.3.5.3. Isolation from Loads
7.3.5.4. Protection from Frost
7.3.5.7. Spatial Separation
Testing of Drainage and Venting Systems
7.3.6.1. Tests and Inspection of Drainage or Venting Systems
7.3.6.4. Water Tests in Drain, Waste and Vent Systems
7.3.6.5. Air Tests
Testing of Potable Water Systems
7.3.7.1. Application of Tests
7.3.7.2. Test of Potable Water Systems
Arrangement of Drainage Pipe
7.4.6.4. Protection from Backflow
Cleanouts
7.4.7.1. Cleanouts for Drainage Systems
7.4.7.2. Size and Spacing of Cleanouts
Minimum Slope and Length of Drainage Pipes
7.4.8.1. Minimum Slope
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.