If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
Plumbing Systems is the final module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC and Plumbing systems for housing and small buildings in Ontario.
Module 3 focuses on Part 7 - Plumbing Systems.
If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
Plumbing Systems is the final module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC and Plumbing systems for housing and small buildings in Ontario.
Module 3 focuses on Part 7 - Plumbing Systems including:
Module 3 Part 7 - Plumbing Systems
This training Module covers the following topics in Part 7 of Division B of the Ontario Building Code.
Service Connections
7.1.5.1. Sanitary Drainage Systems
7.1.5.2. Storm Drainage Systema
7.1.5.3. Water Distribution Systems
7.1.5.4. Separate Services
Location of Fixtures
7.1.6.1. Lighting and Ventilation Requirements
7.1.6.2. Accessibility
Materials and Equipment
7.2.1.3. Identification and Certification
7.2.1.5. Withstanding Pressure
Fixtures
7.2.2.1. Surface Requirements
7.2.2.2. Conformance to Standards
7.2.2.3. Showers
7.2.2.4. Concealed Overflows
7.2.2.5. Lavatories
Pipe Fittings
7.2.4.1. T and Cross Fittings
7.2.4.3. 90° Elbows
7.2.4.4. Fittings Restricted in Use
Water Service Pipes and Fire Service Mains
7.2.11.2. Certification or Conformance
7.2.11.3. Tracer Wire
Support of Piping
7.3.4.1. Capability of Support
7.3.4.6. Support for Underground Horizontal Piping
Protection of Piping
7.3.5.1. Backfill of Pipe Trench
7.3.5.2. Protection of Non-Metallic Pipe
7.3.5.3. Isolation from Loads
7.3.5.4. Protection from Frost
7.3.5.7. Spatial Separation
Testing of Drainage and Venting Systems
7.3.6.1. Tests and Inspection of Drainage or Venting Systems
7.3.6.4. Water Tests in Drain, Waste and Vent Systems
7.3.6.5. Air Tests
Testing of Potable Water Systems
7.3.7.1. Application of Tests
7.3.7.2. Test of Potable Water Systems
Arrangement of Drainage Pipe
7.4.6.4. Protection from Backflow
Cleanouts
7.4.7.1. Cleanouts for Drainage Systems
7.4.7.2. Size and Spacing of Cleanouts
Minimum Slope and Length of Drainage Pipes
7.4.8.1. Minimum Slope
At the end of the Module, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
Plumbing Systems is the final module in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC and Plumbing systems for housing and small buildings in Ontario.
Module 3 focuses on Part 7 - Plumbing Systems including:
Module 3 Part 7 - Plumbing Systems
This training Module covers the following topics in Part 7 of Division B of the Ontario Building Code.
Service Connections
7.1.5.1. Sanitary Drainage Systems
7.1.5.2. Storm Drainage Systema
7.1.5.3. Water Distribution Systems
7.1.5.4. Separate Services
Location of Fixtures
7.1.6.1. Lighting and Ventilation Requirements
7.1.6.2. Accessibility
Materials and Equipment
7.2.1.3. Identification and Certification
7.2.1.5. Withstanding Pressure
Fixtures
7.2.2.1. Surface Requirements
7.2.2.2. Conformance to Standards
7.2.2.3. Showers
7.2.2.4. Concealed Overflows
7.2.2.5. Lavatories
Pipe Fittings
7.2.4.1. T and Cross Fittings
7.2.4.3. 90° Elbows
7.2.4.4. Fittings Restricted in Use
Water Service Pipes and Fire Service Mains
7.2.11.2. Certification or Conformance
7.2.11.3. Tracer Wire
Support of Piping
7.3.4.1. Capability of Support
7.3.4.6. Support for Underground Horizontal Piping
Protection of Piping
7.3.5.1. Backfill of Pipe Trench
7.3.5.2. Protection of Non-Metallic Pipe
7.3.5.3. Isolation from Loads
7.3.5.4. Protection from Frost
7.3.5.7. Spatial Separation
Testing of Drainage and Venting Systems
7.3.6.1. Tests and Inspection of Drainage or Venting Systems
7.3.6.4. Water Tests in Drain, Waste and Vent Systems
7.3.6.5. Air Tests
Testing of Potable Water Systems
7.3.7.1. Application of Tests
7.3.7.2. Test of Potable Water Systems
Arrangement of Drainage Pipe
7.4.6.4. Protection from Backflow
Cleanouts
7.4.7.1. Cleanouts for Drainage Systems
7.4.7.2. Size and Spacing of Cleanouts
Minimum Slope and Length of Drainage Pipes
7.4.8.1. Minimum Slope
At the end of the Module, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.