If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
HVAC Requirements is the first in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario.
This 2 part module focuses on HVAC requirements in Part 9, with over 1 hour of content.
If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
HVAC Requirements is the first in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario.
This 2 part module focuses on HVAC requirements in Part 9, with over 1 hour of content including the following:
Module 1 - HVAC Requirements in Part 9
Part 1
This training Module covers the following topics for HVAC requirements in Part 9 of Division B of the Ontario Building Code.
General
9.33.1.1. Design and Installation Requirements
9.33.1.2. Solid Fuel-Burning Appliances
9.33.1.3. Structural Movement
Heating Systems
9.33.2.1. Residential Heating Systems
Design Temperatures
9.33.3.1. Indoor Design Temperatures
9.33.3.2. Outdoor Design Temperatures
Carbon Monoxide Alarms
9.33.4.1. Application
9.33.4.2. Location of Carbon Monoxide Alarms
9.33.4.3. Installation and Conformance to Standards
Part 2
General
6.1.1.1. Scope
Design
6.2.1.1. Good Engineering Practice
6.2.1.6. Heat Recovery Ventilators
Ventilation
6.2.2.1. Required Ventilation
Air Ducts for Low Capacity Systems
6.2.4.1. Application
6.2.4.2. Duct Design
6.2.4.3. Construction and Installation of Ducts and Plenums
6.2.4.4. Warm-Air Supply Outlets
6.2.4.6. Adjustable Dampers and Balance Stops
6.2.4.7. Return-Air Systems
6.2.4.10. Clearances of Ducts and Plenums
6.2.4.11. Exhaust Ducts and Outlets
6.2.4.12. Make-up Air
6.2.4.13. Supply, Return, Intake and Exhaust Air Opening
6.2.4.14. Air Filters and Equipment
At the end of each video, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.
If ordering this course on behalf of another individual, please contact Orderline directly to place the order; this is required to ensure that the correct student information is captured for the student transcripts (ordering directly through the online cart may result in the cardholder/ordering customer’s information being captured instead of the student information).
HVAC Requirements is the first in a series of online Ontario Building Code training developed to assist participants in understanding the requirements for HVAC systems for housing and small buildings in Ontario.
This 2 part module focuses on HVAC requirements in Part 9, with over 1 hour of content including the following:
Module 1 - HVAC Requirements in Part 9
Part 1
This training Module covers the following topics for HVAC requirements in Part 9 of Division B of the Ontario Building Code.
General
9.33.1.1. Design and Installation Requirements
9.33.1.2. Solid Fuel-Burning Appliances
9.33.1.3. Structural Movement
Heating Systems
9.33.2.1. Residential Heating Systems
Design Temperatures
9.33.3.1. Indoor Design Temperatures
9.33.3.2. Outdoor Design Temperatures
Carbon Monoxide Alarms
9.33.4.1. Application
9.33.4.2. Location of Carbon Monoxide Alarms
9.33.4.3. Installation and Conformance to Standards
Part 2
General
6.1.1.1. Scope
Design
6.2.1.1. Good Engineering Practice
6.2.1.6. Heat Recovery Ventilators
Ventilation
6.2.2.1. Required Ventilation
Air Ducts for Low Capacity Systems
6.2.4.1. Application
6.2.4.2. Duct Design
6.2.4.3. Construction and Installation of Ducts and Plenums
6.2.4.4. Warm-Air Supply Outlets
6.2.4.6. Adjustable Dampers and Balance Stops
6.2.4.7. Return-Air Systems
6.2.4.10. Clearances of Ducts and Plenums
6.2.4.11. Exhaust Ducts and Outlets
6.2.4.12. Make-up Air
6.2.4.13. Supply, Return, Intake and Exhaust Air Opening
6.2.4.14. Air Filters and Equipment
At the end of each video, the participant will be required to answer a short quiz to test their knowledge of the topic.
This course is eligible for one OAA (Ontario Association of Architects) continuing education credit upon successful completion.
Note: Registration and login credentials will be provided via email.